The TAA compliant NetworkHD 500s series is an HDMI 2.0 AV over IP solution. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. A powerful routing engine allows audio, video, USB and control signals to be discretely sent to any endpoint. Create captivating video walls up to 16×16 in size and control them with the tap of a button in the amazing NetworkHD Touch control app. –
WyreStorm NHD-500-T — NetworkHD 500 Series 4K60 4:4:4 JPEG2000 TAA Compliant Encoder & Decoder
The TAA compliant NetworkHD 500s series is an HDMI 2.0 AV over IP solution. Capable of encoding up to 4K60 including Dolby Vision, HDR10 and HLG content. The 500 series comes loaded with a number of advanced features such as the flexibility of Ethernet or Fiber as a transport method. Ultra-low latency encoding and incredibly fast matrix switching speeds enhance the experience. A powerful routing e
| Marka | WyreStorm |
|---|---|
| Model | NHD-500-T |
| Inputs | TX: 1 x HDMI 2.0b 1 x 3.5mm TRS Audio RX: 1 x S/PDIF (Toslink) |
| Outputs | TX: 1 x 5-pin Balanced Audio 1 x S/PDIF Digital RX: 1 x HDMI 2.0b 1 x 5-Pin Balanced Audio |
| Video Resolution (Max) | 5120x2160p@50/60Hz 4:2:0 CVT 5120x1440p@50/60Hz 4:2:0 CVT 4096x2160p @ 60Hz 8bit 4:4:4 or RGB 3840x2160p @ 60Hz 12bit 4:2:2 Dolby Vision/HDR/HLG 1920x1080p @60Hz 12bit |
| Audio Formats | Passthrough: 2ch PCM and up to DTS:X and Dolby Atmos ARC: 2ch PCM and up to Dolby Digital+ and DTS 5.1 |
| Supported Standards | DCI, RGB, USB |
| Maximum Pixel Clock | 600Mhz |
| Output Video Encoding | JPEG 2000 |
| Encoding Data Rate | Max 850Mbps |
| End-to-End Latency | 1 video frame latency (pass-through mode) 4ms @ 4K60, 2 video frames latency (scaler/VW mode) |
| HDMI | HDMI 2.0, HDCP 2.3, CEC, EDID, ARC |
| LAN | 1x 1GbE 8-Pin RJ45 1x 1Gb SFP: (1000Base-SX: 550m using OM3 MMF) (1000Base-LX: 5km using SMF) (1000Base-LX10: 10km using SMF) |
| IR | 1x IR TX 3.5mm TS Mono Jack, API Programmable 1x IR RX 3.5mm TRS Stereo Jack, API Programmable |
| RS-232 | 1x 3-Pin Phoenix Connector, 2-way, API Programmable |
| Communication Protocols | Telnet, TLS, SSH, HTTP, HTTPS |
| USB | TX: 1 x USB 2.0 Type Host RX*: 2 x USB HID Type A 1 x USB 2.0 Type A (up to 300Mbps upstream) *With firmware package 7.6 2x USB HID are supporting USB2.0 specifications up to 300Mbps upstream and USB port labeled as USB 2.0 is disabled. |
| Power Supply | 12V DC 1A, 802.3af PoE Compliant |







Değerlendirmeler
Henüz değerlendirme yapılmadı.