DISCONTINUED The NHD-110-TX is the AV encoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provides video encoding/decoding of up to 1080p 60Hz content over a network. The NHD-110-TX provides a low bandwidth yet incredibly high quality video stream allowing you to easily accomplish large scale AV deployments. The 110 series components are also compatible with the NHD-150-RX multiview receiver allowing up to 9 unique streams to be sent to a single display.
WyreStorm NHD-110-TX — 1080p HD Low Bandwidth AV over IP Encoder
DISCONTINUED The NHD-110-TX is the AV encoder to the powerful 110 series of NetworkHD AV over IP components. The 110 series components provides video encoding/decoding of up to 1080p 60Hz content over a network. The NHD-110-TX provides a low bandwidth yet incredibly high quality video stream allowing you to easily accomplish large scale AV deployments. The 110 series components are also compatible
| Marka | WyreStorm |
|---|---|
| Model | NHD-110-TX |
| Inputs | TX: 1x HDMI 19-pin HDMI type A RX: 1x 8-pin RJ-45 female, 10/100Base-T |
| Outputs | TX: 1x 3-pin Phoenix Analog Audio (de-embed from HDMI input) RX: 1 x HDMI 19-pin HDMI type A 1 x 3-pin Phoenix Analog Audio Both HDMI and Analog outputs allow discrete audio routing from any available NHD-110-TX on the same network. |
| Video Encoding | Primary Stream – configurable up to 30Mbps Preview Stream – MJPEG CIF@30Hz, configurable up to 2Mbps |
| End to End Latency | High Quality Mode: ~250ms Low Latency Mode: ~80ms |
| Audio Formats | LPCM/MPEG4 AAC stereo, 48KHz |
| Video Resolution (Max) | HDMI: 1920x1080p @60Hz 8bit (15m/50ft) Cat5e or higher: 1920x1080p @60Hz 8bit (100m/328ft) |
| Maximum Pixel Clock | 150Mhz |
| HDMI | HDCP 1.4, EDID |
| RS-232 | 1x 3-Pin Phoenix – API controlled from NHD-000-CTL |
| LAN | 1x 8-pin RJ-45 female, 10/100Base-T, PoE 802.1af |
| IR | 1x IR TX: 3.5mm TS Jack Socket IR signals can be bi-directional passthrough or via API commands from NHD-000-CTL for routable IR to discrete TX/RX devices |
| USB | TX: 1 x Type B Host USB v1.1 for KVM applications – bandwidth is 115200bps (routable) RX: 2 x Type A Device Ports USB v1.1 for KVM applications – bandwidth is 115200bps (routable) |
| Power Supply | PoE, 12V 1A DC |
| Max Power Consumption | 6W (DC adapter) |








Değerlendirmeler
Henüz değerlendirme yapılmadı.