WyreStorm CON-H2-SCL — 4K60 In-Line HDMI Scaler with Audio Breakout

WyreStorm CON-H2-SCL — 4K60 In-Line HDMI Scaler with Audio Breakout - Görsel 2

WyreStorm CON-H2-SCL — 4K60 In-Line HDMI Scaler with Audio Breakout

Name: WyreStorm CON-H2-SCL — 4K60 In-Line HDMI Scaler with Audio Breakout | WyreStorm Türkiye
SKU: CON-H2-SCL
Availability: InStock

Teklif Al

Stok kodu: CON-H2-SCL Kategoriler: Discontinued Products

DISCONTINUED An essential tool when mixing 4K & 2K screens on the same distribution system, the CON-H2-SCL enables in-line scaling of HDMI content. An HDMI signal from a source device, DA or matrix is converted so that it can be accepted by the connected display. Via a powerful scaling chip, 4K/60 4:4:4 or 4:2:0 can be down-scaled to as low as 480P; likewise, content can be up-scaled to 4K/60 4:4:4. Set up & configuration is done using a simple PC tool which is part of WyreStorm Management Suite V1.6. The software tool allows management of the scaling function and EDID via a simple interface.

Marka	WyreStorm
Model	CON-H2-SCL
Inputs	1x HDMI In: 19-pin HDMI Type A
Outputs	1x HDMI Out: 19-pin HDMI Type A 1x S/PDIF Out: TOSLINK (Digital Optical)
Audio Formats	HDMI Pass-through: 2ch PCM S/PDIF Out: De-Embed: 2ch PCM
Video Resolution (Max)	1920x1080p @60Hz 12bit 3840x2160p @60Hz 12bit 4:2:2 HDR 4096x2160p @60Hz 8bit 4:4:4
Supported Standards	DCI, RGB, HDR, HDR10, Dolby Vision, HLG, BT.2020, BT.2100
Maximum Pixel Clock	600MHz
HDMI	HDMI 2.0, HDCP 2.2, EDID Inputs supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)
RS-232	1x RS-232: 3-pin Terminal Block – 3.5mm
USB	1x USB: USB-A, Firmware Updates Only
Power Supply	12V DC 2A
Max Power Consumption	8.38W