WyreStorm RX3-100 — 4K HDR 4:4:4 60Hz HDBaseT3.0 Receiver with USB Device Inputs, Audio De-embed & PoH 100m/328ft over Cat6

Name: WyreStorm RX3-100 — 4K HDR 4:4:4 60Hz HDBaseT3.0 Receiver with USB Device Inputs, Audio De-embed & PoH 100m/328ft over Cat6 | WyreStorm Türkiye
SKU: RX3-100
Availability: InStock

Teklif Al

Introducing the RX3-100, an uncompressed 18G HDBaseT 3.0 receiver that achieves signal transmission up to 100m/328ft at 4K@60Hz via Cat.6A cable. With HDBaseT 3.0, experience USB data transfers of up to 300Mbps, nearly doubling HDBaseT 2.0’s capability of 190Mbps. This heightened capacity supports high-speed connections to 4K webcams, whiteboards, and data drives. The RX3-100 seamlessly pairs with

Stok kodu: RX3-100 Kategoriler: KVM Extender, Presentation Switcher

Marka	WyreStorm
Model	RX3-100
Inputs	1x HDBT In: 8-pin RJ45 3x Type A (Device) 1x RS-232: 3-pin Phoenix
Outputs	1x HDMI Out: 19-pin Type A Female 1x Audio Out 3.5mm (1/8in) TRS Stereo, 1x Line Out 2ch audio over HDBaseT, 1-way from TX
Max Pixel Clock	600MHz
Video Resolution (Max)	1920x1080p @60Hz 12bit 3840×2160 @60Hz 4:4:4 8bit 5120×2160 @30Hz 5120×2160 @60Hz 4:2:0
Supported Standards	DCI, RGB, HDR10, Dolby Vision, HLG, BT.2020, BT.2100
Audio Formats	HDMI Out: 2ch Analog/PCM, Multichannel: LPCM up to DTS-X and Dolby Atmos Audio Out/De-embed: 2ch Analog/PCM
HDMI	HDMI, HDCP 2.3, EDID, CEC Pass-through
HDBaseT	HDMI, USB, HDCP 2.3, EDID, 2-way PoH, Bidirectional RS-232, CEC
USB	3x Type A (Device), Maximum uplink speed: 300Mbps
RS-232	1x RS-232: 3-pin Phoenix
Power Supply	20V DC 3A
Max Power Consumption	10.92W

Değerlendirmeler

Henüz değerlendirme yapılmadı.

“WyreStorm RX3-100 — 4K HDR 4:4:4 60Hz HDBaseT3.0 Receiver with USB Device Inputs, Audio De-embed & PoH 100m/328ft over Cat6” için yorum yapan ilk kişi siz olun