DISCONTINUED The NHD-250-RX is an enhanced MultiView display decoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network. The NHD-250-RX H.264 decoder is intended for use with 100 or 200 Series H.264 encoders (sold separately) to provide a complete end-to-end video distribution system. When used in conjunction with the NHD-000-CTL system controller complete control integration is simple.
WyreStorm NHD-250-RX — NetworkHD 200 Series AV over IP H.264 MultiView Processor
DISCONTINUED The NHD-250-RX is an enhanced MultiView display decoder compatible with the NetworkHD 100 and 200 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many and many-to-many over a managed network. The NHD-250-RX H.264 decoder is intended for use with 100 or 200 Series H.264 encoders (sold separately) to provide a complete end-to-end video
| Marka | WyreStorm |
|---|---|
| Model | NHD-250-RX |
| Inputs | 1x 8-pin RJ-45 (Transmission from TX) |
| Outputs | 1x HDMI Out: 19-pin HDMI Type A1x Audio Out: 3-pin Terminal Block (3.5mm) |
| Audio Formats | 2ch LPCM 48KHz |
| Input Video Decoding | H.264 |
| Decoding Data Rate | Max: 30Mb/s per stream |
| End to End Latency (Max) | ~80ms (low latency mode), ~300ms (high quality mode) |
| Video Resolutions (Max) | 3840x2160p @60Hz (Tile mode only) 1920x1080p @60Hz 1280x720p @60Hz 720x576p @50Hz 720x480p @60Hz 60fps Progressive: 640×480, 800×600, 1024×768, 1280×800, 1280×1024, 1360×768, 1366×768, 1400×1050, 1440×900, 1600×1200, 1680×1050, 1920×1200 |
| Maximum Pixel Clock | 594MHz |
| HDMI | HDCP 1.4, CEC |
| RS-232 | 2x RS-232: 4-pin Terminal Block (3.5mm), 2 Way |
| Ethernet | 1x LAN (PoE): 8-pin RJ-45 ANSI/TIA-568 8P8C, 1000Base-T, PoE PD (IEEE 802.3af) |
| Power Supply | 12V DC |
| PoE | IEEE 802.3af, (15.4W at PSE) |
| Max Power Consumption | 6W (DC adapter) |








Değerlendirmeler
Henüz değerlendirme yapılmadı.