WyreStorm CON-H2-EDID — 4K60 In-line Signal Re-Clocker with EDID Management

WyreStorm CON-H2-EDID — 4K60 In-line Signal Re-Clocker with EDID Management - Görsel 2

WyreStorm CON-H2-EDID — 4K60 In-line Signal Re-Clocker with EDID Management

Name: WyreStorm CON-H2-EDID — 4K60 In-line Signal Re-Clocker with EDID Management | WyreStorm Türkiye
SKU: CON-H2-EDID
Availability: InStock

Teklif Al

DISCONTINUED A multi-purpose installer tool, the CON-H2-EDID can perform a variety of tasks within an install. As an in-line device, it can act as an EDID manager to request specific content from a source, or as an audio de-embedder, extracting HDMI source audio via the S/PDIF or stereo mini-jack ports. Additionally, it can be a micro zone controller, sending CEC and RS-232 power triggers to conne

Stok kodu: CON-H2-EDID Kategoriler: Discontinued Products

Marka	WyreStorm
Model	CON-H2-EDID
Inputs	1x HDMI In: 19-pin HDMI Type A
Outputs	1x HDMI Out: 19-pin type A 1x Audio Out: 3.5mm (1/8in) TRS Stereo 1x S/PDIF Out: S/PDIF Coaxial Digital
Audio Formats	HDMI Pass-through: 2ch PCM, Multichannel: LPCM and Up to DTS-X and Dolby Atmos S/PDIF Out: De-Embed: 2ch PCM, Multichannel: Up to 5.1 DTS and Dolby Digital Analog Out: 2ch
Video Resolution (Max)	1920x1080p @60Hz 12bit 3840x2160p @60Hz 12bit 4:2:2 HDR 4096x2160p @60Hz 8bit 4:4:4
Supported Standards	DCI, RGB, HDR, HDR10, Dolby Vision, HLG, BT.2020, BT.2100
Maximum Pixel Clock	600MHz
HDMI	HDMI 2.0, HDCP 2.2, EDID, CEC Triggering Inputs supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)
CEC	CEC Power Triggering, Requires CEC compatibility
RS-232	1x RS-232: 3-pin Terminal Block – 3.5mm
Relays	1x Relay 2: 3-pin Terminal Block – 3.5mm, 1x Relay 1: 3-pin Terminal Block – 3.5mm, Max 1A load
Power Supply	12V DC 0.5A
Max Power Consumption	≤2W